Nano Insulation Board

Melting Point: ＞1200℃

Maximum Operating Temperature: 1000℃

Bulk Density: 600±10%kg/m³; 300±10% kg/m³

Linear Shrinkage(900℃*3h): ≤-1%

Function: Thermal insulation, fire proof

Send E-mail Get price

Share With :

Introduction

Technical Date

Application

Resource

Nano Insulation Board is a new product manufactured by using special inorganic refractory nano powder and applying the latest nano technology. At high temperatures, its thermal insulation performance is more effective than traditional thermal insulation materials.

The product forms are plate and brick, and can provide outer protective layer materials such as PE heat shrinkable film and aluminum foil. The nano heat insulation material is environmentally friendly, the powder and reinforcing fibers in it meet the environmental protection standards, and will not cause harm due to being inhaled into the human body. It is an environmentally friendly material that is non-toxic to the human body.

1. Excellent thermal insulation performance, the thermal conductivity is much lower than that of traditional materials, and the dosage is about half that of calcium silicate board and ceramic fiber board under the same use conditions.

2. Skill benefits are obvious. Minimize the heat dissipation of equipment, reduce the energy consumption of thermal kilns, and improve the production efficiency of kilns.

3. Satisfies high standard design requirements and has high cost performance.

4. It is not easy to pulverize at high temperature and has good durability. The thermal insulation performance is not attenuated, and it has better high temperature strength.

5. It is safe and hygienic to use. Does not contain toxic substances such as asbestos, sulfur, chlorine, etc., and is environmentally friendly.

Items		JDN-1 Nano Insulation Board
Color		Grey
Melting Point		＞1200℃
Maximum Operating Temperature		1000℃
Bulk Density		600kg/m³±10%
Linear Shrinkage(900℃*3h)		≤-1%
Thermal Conductivity	600℃	≤0.052W/m.k
	1000℃	≤0.085W/m.k

Items		JDN-II Nano Insulation Board
Color		Grey
Melting Point		＞1200℃
Maximum Operating Temperature		1000℃
Bulk Density		600kg/m³±10%
Linear Shrinkage(900℃*3h)		＜-1%
Thermal Conductivity	300℃	≤0.02W/m.k
	600℃	≤0.04W/m.k
	1000℃	≤0.065W/m.k

Items		JDN-H Nano Insulation Board
Color		White
Classification Temperature		1100℃
Melting Point		＞1200℃
Bulk Density		300±10% kg/m³
Compressive Strength (compressed 10%)		1.0Mpa
Linear Shrinkage(900℃*3h)		≤-1%
Thermal Conductivity	300℃	≤0.02W/m.k
	600℃	≤0.030W/m.k
	1000℃	≤0.038W/m.k

JDN-I and JDN-II are suitable for medium and high temperature parts such as cyclone preheater, calciner, flue gas chamber, grate cooler, tertiary air duct, kiln hood, etc., and can partially replace traditional calcium silicate boards. JDN-H type is suitable for expansion of cement mill, calciner and preheater.

Calcium Silicate Board

Download